How to Repair a Jammed Cordless Hedge Trimmer

!±8± How to Repair a Jammed Cordless Hedge Trimmer

When you are using a gas or electric hedge trimmer the possibility of the blades being jammed is highly probably, especially if the job is too much for the machine to handle. Sometimes things can obscure the area that you are trimming and jam the trimmer up. Dull blades are more susceptible to being damaged after multiple uses. However, there is a way to unjam the blades if they do unfortunately get jammed on you when trying to do some yard work.

Some things that you are going to need to repair your hedge trimmer are gloves, soap, a rag, lubricant, a dowel, and pruning shears.

First, for safety reasons, turn off the trimmer and unplug the power source to be certain that it doesn't accidentally get triggered while you're working. Look at the blades closely to determine exactly how they got jammed in the first place. Make a free break of any branches that are in the blades. Pruning shears can also help you unjam it by using it to clip away anything that is left behind. All the broken wood should be sheared.

You could also check the pruner for any damage and debris by placing it on a flat surface. It is possible that a lot of wooden debris is caught between the teeth of the hedge trimmer. A dowel will allow you to push the debris that are between the teeth out of it. Always wear protective gloves so that you don't cut your fingers in the process.

The trimmer could suffer additional damage if any of the blades are cracked or the teeth in the trimmer bent out of their original shape. The blades should be replaced often, especially if damage is suspected. You can also sharpen blades that are dull if they aren't damaged. Sharper blades are able to make cleaner cuts and have a smaller chance of getting jammed up.

Once the blades are repaired, you should take preventative measures to ensure that they don't get jammed again if possible. Some of the steps you should take include keeping the blades sharp by frequently sharpening them after excessive use and cleaning them with soap and water after every use. The soap allows you to remove any debris and sap that builds up. Always wear gloves when cleaning as well because sharp blades have the possibility to cut your fingers open. If sap is an ongoing problem you can try to use resin remover. WD-40 can keep the blades newer longer and keep the machine operating much longer.

To avoid getting the clippers jammed, if you get stuck in a certain bush avoid twisting. This can damage the teeth and the blades can be cracked quite frequently. Continue to try getting this branch clipped by the method of working slow and steady. One of the worst ways to clear your blades is to try to add power to the trim. Adding power isn't going to help it and it could ruin the parts inside including the clutch and drive belt.